Download Online VALID NS0-527 Exam Dumps File Instantly[Feb 22, 2024]
NS0-527 Exam Dumps For Certification Exam Preparation
The NS0-527 exam is ideal for IT professionals who want to demonstrate their expertise in NetApp data protection technologies. NetApp Certified Implementation Engineer, Data Protection certification is also suitable for individuals who are responsible for designing and implementing data protection solutions for their organizations. The NS0-527 exam covers a range of topics, including NetApp data backup and recovery, NetApp disaster recovery, and NetApp high availability solutions.
To prepare for the NS0-527 certification exam, candidates can take advantage of NetApp's training courses, study guides, and practice exams. These resources are designed to help candidates prepare for the exam and gain a thorough understanding of the NetApp data protection solutions. With the NS0-527 certification, IT professionals can demonstrate their expertise in NetApp data protection solutions, which can lead to career advancement opportunities and increased earning potential.
NEW QUESTION # 62
Click the Exhibit button.
You are asked to set up aSnapMirror relationship to protect some Oracle DB volumes on both nodes of the aff-01 and aff-02 clusters. You are using the 1 Gb network and the other nodes all have free space to support the mirror.
Referring to the exhibit, which two nodes would provide the least network transfer time for the relationship?
(Choose two.)
- A. aff-01 to tme-ontap-prd-01
- B. aff-02 to tme-ontap-prd-02
- C. aff-02 to ontap9-tme-8040-02
- D. aff-02 to ontap9-tme-8040-01
Answer: B,C
NEW QUESTION # 63
You are asked to select a controller platform as a backup target with support for 40GbE, 32 Gbps FC, and the ability to attach three stacks of disk shelves.
Which tool would you use to find the information that you need?
- A. OneCollect
- B. Interoperability Matrix Tool (IMT)
- C. Hardware Universe
- D. Active IQ
Answer: C
NEW QUESTION # 64
You have a SnapMirror relationship established between two sites and want to verify that the data on the DR site is usable without disturbing the source.
In this scenario, which three steps are required to accomplish this task? (Choose three.)
- A. Configure the destination volume for data access, then access thedata volume from a client.
- B. Resume the SnapMirror destination, then updatethe SnapMirror destination.
- C. Quiesce the SnapMirror destination, then break the SnapMirror destination.
- D. Resynchronize the destination to the source volume, then update the source volume.
- E. Reverse the SnapMirror source and destination, then re-initialize SnapMirror.
Answer: C,D,E
NEW QUESTION # 65
Click the Exhibit button.
You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.
Cluster2 intercluster LIFIP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234 Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234 Referring to the exhibit, which statement is correct?
- A. The Source Cluster Passphrase is incorrect.
- B. The Target Cluster IP is incorrect.
- C. The Target Cluster Passphrase is incorrect.
- D. The Source Cluster IP is incorrect.
Answer: A,B
NEW QUESTION # 66
Click the Exhibit button.
You have been receiving the lag status error notifications shown in the exhibit.
What must you do to correctthis problem?
- A. Quiesce the relationship.
- B. Add a schedule to the relationship.
- C. Fan out the relationship.
- D. Resynchronize the relationship.
Answer: D
NEW QUESTION # 67
A customer wants compression enabled on the SnapVault secondary volume.
Which two statements are true? (Choose two.)
- A. A warning message is displayed when you enable compression on a SnapVault secondary volume.
- B. Data transfers will not be storage efficient after enabling compression on the SnapVault secondary volume.
- C. Data transfers will be storage efficientafter enabling compression on the SnapVault secondary volume.
- D. A warning message is not displayed when you enable compression on a SnapVault secondary volume.
Answer: A,B
NEW QUESTION # 68
Click the Exhibit button.
A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m.
They have a network connection between two sites thatprovides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.
Referring to the exhibit, how long does the SnapMirror update take to finish?
- A. two hours
- B. three hours
- C. four hours
- D. one hour
Answer: A
NEW QUESTION # 69
Click the Exhibit button.
Commvault IntelliSnap and NetApp SnapCenter are both being used to back up the same Microsoft SQL Server database.
Referring to the exhibit, which action will SnapCenter perform on the Microsoft SQL transaction logs?
- A. delete
- B. move
- C. keep
- D. truncate
Answer: D
NEW QUESTION # 70
You want to provide your team with a SnapProtect report that shows how many backups succeeded, were delayed, and failed over the last 30 days. You also want detailed information about the jobs, agents, and clients.
WhichCommCell report provides the necessary information?
- A. Activity
- B. Health
- C. SLA
- D. Backup Job Summary
Answer: D
NEW QUESTION # 71
You have completed the baseline copy for a new inter-cluster SnapMirror relationship.
How do you verify the baseline without making the destination volume writable?
- A. Create a FlexClone volume clone of the SnapMirror source volume and then verify the clone.
- B. Break the mirror and verify the source and destination volumes.
- C. Break the mirror and verify thedestination volume online.
- D. Create Snapshot copy and a FlexClone volume clone of the SnapMirror destination volume.
Answer: D
NEW QUESTION # 72
You want to set up protection relationships at the time of provisioning one or more primary volumes in the source cluster in ONTAP.
Which NetApp management tool enables you to accomplish this task?
- A. OnCommand System Manager
- B. OnCommand Unified Manager
- C. ONTAPCLI
- D. SnapCenter
Answer: A
NEW QUESTION # 73
Your customer has issued the metrocluster heal command.
Which two statements are true regarding this command? (Choose two.)
- A. The customer has replaced failed disks in one of the clusternodes.
- B. The customer has to run the command twice.
- C. The customer has one node in the site down and wants to heal the cluster.
- D. The customer is preparing for a disaster recovery switchback.
Answer: A,D
NEW QUESTION # 74
Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.
In this scenario, what must the customer do tocreate the SnapMirror relationship?
- A. The customer can create a XDP type SnapMirror relationship withoutneeding to perform an upgrade.
- B. The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP
9.1 and then createthe XDP SnapMirror relationship. - C. The customer can create a DP type SnapMirror relationship without needing to perform an upgrade.
- D. The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP
8.3 and then create the XDP SnapMirror relationship.
Answer: D
NEW QUESTION # 75
You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date.
From My AutoSupport, which report would you use?
- A. Visualization
- B. Transition Advisor
- C. Event Viewer
- D. Upgrade Advisor
Answer: A
NEW QUESTION # 76
A customer is running ONTAP 9.7 on a FAS2720 cluster that has 12 x 4 TB NL-SAS drives in the chassis with capacity running low. You decide to use Fabric Pool technology to solve this problem.
What does the customer need to do to accomplish this task?
- A. Add an SSD aggregate.
- B. Use the CLI and add a capacity pool.
- C. Use the wizard and add a capacity pool.
- D. Purchase a Data Protection Optimized (DPO) license.
Answer: A
NEW QUESTION # 77
You want to implement a cross-site disaster recovery solution for a mission critical business application that can provide a near zero recovery time objective (RTO) and recovery point objective (RPO). You want to use the existing high-bandwidth dedicated Ethernet and IP infrastructure for replication between the two sites.
Which NetApp solution meets these business requirements?
- A. MetroCluster IP
- B. SVM DR
- C. FlexGroup
- D. SynchronousSnapMirror
Answer: A
NEW QUESTION # 78
An administrator notices that a NAS volume has been filled completely by active data and Snapshot copies that have expanded over the Snap reserve. The volume is no longer writable.
In this scenario, which two actions must you take to make the volume writable again? (Choose two.)
- A. Delete the files in the active file system.
- B. Delete the SnapVault relationships.
- C. Delete the SnapMirror relationships.
- D. Delete Snapshot copies until space is available.
Answer: B,D
NEW QUESTION # 79
What are two NetApp data protection solutions? (Choose two.)
- A. TimeFinder
- B. SnapMirror
- C. RecoverPoint
- D. SnapVault
Answer: B,D
NEW QUESTION # 80
A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system.
Which SnapMirror policy andrelationship type should be used?
- A. Mirror And Vault/Relationship Type DP
- B. Mirror And Vault/Relationship Type TDP
- C. Mirror And Vault/Relationship Type LS
- D. Mirror And Vault/Relationship Type XDP
Answer: D
NEW QUESTION # 81
Which two tools would you use to verify that an Oracle database has an application-consistent snapshot taken? (Choose two.)
- A. OnCommand Unified Manager
- B. OnCommand System Manager
- C. SnapManager for Oracle
- D. SnapCenter
Answer: C,D
NEW QUESTION # 82
A customer has deployed OnCommand Unified Manager and wants to use it to manage their data protection relationships within their NetApp storage infrastructure.
In this scenario, which additional component must be deployed to satisfy this requirement?
- A. OnCommand System Manager
- B. OnCommand Workflow Automation
- C. OnCommand Cloud Manager
- D. NetApp SnapCenter
Answer: B
NEW QUESTION # 83
You have a FAS9000 with 10 TBNL-SAS drives that is replicating to a FAS8200 with 4 TB NL-SAS drives. An 80 TB source volume on the FAS9000 is showing 50% storage efficiency. After that volume mirror is initialized, the FAS8200 destination volume is showing only 10% storage efficiency.
In this scenario, why is storage efficiency reduced after replication?
- A. The different controller models require logical replication.
- B. The source volume has inline deduplication enabled.
- C. The destination volume has post process compression enabled.
- D. The different sized drives use different efficiency methods.
Answer: D
NEW QUESTION # 84
Click the Exhibit button.
Referring to the exhibit, which volume has the highest level of protection assigned to it?
- A. mworthen_src1_lun
- B. my_vol
- C. project_a
- D. new_work_vol
Answer: A
NEW QUESTION # 85
You have deployed a 4-node fabric MetroCluster configuration for cross-site disaster-recovery protection. In this scenario, which two statements are correct for an automatic unplanned switchover (AUSO) operation?
(Choose two.)
- A. AUSO is triggered in the event of a site-wide controller failure to provide nondisruptive operations.
- B. AUSO is triggered in the event of a site-wide switch failure to provide nondisruptive operations.
- C. AUSO is enabled by default on a MetroCluster cluster.
- D. AUSO is triggered in the event of a complete site-wide failure to provide nondisruptive operations.
Answer: A,C
NEW QUESTION # 86
Which technology uses synchronous replication?
- A. SnapMirror XDP
- B. MetroCluster mirrored aggregate
- C. FabricPool
- D. SVM DR
Answer: A
NEW QUESTION # 87
......
Network Appliance NS0-527 certification exam is a highly specialized certification that tests a candidate's knowledge and skills in implementing NetApp data protection solutions. IT professionals who pass NS0-527 exam will be able to demonstrate their proficiency in designing and implementing data protection solutions using NetApp technologies in large-scale enterprise environments.
Latest Verified & Correct NS0-527 Questions: https://actualtests.crampdf.com/NS0-527-exam-prep-dumps.html