[2024] Pass Network Appliance NS0-527 Exam Updated 158 Questions
Get 2024 Updated Free Network Appliance NS0-527 Exam Questions and Answer
NEW QUESTION # 38
Click the Exhibit button.
In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test thedisaster recovery workflow in an upcoming maintenance window.
Referring to the exhibit, which step should be performed next to test the recovery workflow?
- A. Delete the SVM-DR relationship.
- B. Abort any ongoing transfers.
- C. Update any ongoing transfers.
- D. Pause any ongoing transfers.
Answer: B
NEW QUESTION # 39
Data on an AFF system is replicated using SnapMirror to aFAS system that is configured with NL-SAS-based storage.
In this scenario, which storage efficiency is lost on the SnapMirror destination?
- A. aggregate-level deduplication
- B. compaction
- C. volume-level deduplication
- D. compression
Answer: D
NEW QUESTION # 40
A customer wants to set up SNMP to monitor their ONTAP platforms. Because of security reasons, they need strong authentication and data encryption?
In this scenario, which SNMP version satisfies these requirements?
- A. v2c
- B. v3
- C. v2
- D. v1
Answer: B
NEW QUESTION # 41
Click the Exhibit button.
Your customer is deploying SnapCenter to protect volumes on an ONTAP Select cluster.
Referring to the exhibit, which licensing is required to protect the Engineering and Marketing volumes?
- A. a SnapProtectApps controller-based license
- B. a 3 TB SnapCenter capacity-based license
- C. a SnapManagerSuite controller-based license
- D. a 5TB SnapCenter capacity-based license
Answer: A
NEW QUESTION # 42
Click the Exhibit button.
A customer is interested in using SnapCenter tosupport Snapshot copies with their Oracle DB. They virtualized their environment but do not have any block protocols available.
In this solution, which protocol shown in the exhibit is supported?
- A. FC
- B. SMB3
- C. iSCSI
- D. NFS
Answer: D
NEW QUESTION # 43
You have experienced a disaster at your source site and activated SVM DR. The source site is now up, but your source SVMs no longer exist. You must restore data to the original source and maintain the SVM DR configuration.
Which two steps must be taken to accomplish this task? (Choose two.)
- A. Delete the existing SVM peer relationship.
- B. Delete the cluster peer relationship.
- C. Create the new source SVM by creating an SVM disaster-recovery relationship from the original destination.
- D. Replicate the data from the disaster-recovery site to the new source with volume SnapMirror.
Answer: A,D
NEW QUESTION # 44
Click the Exhibit button.
Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server
4.1.1? (Choose two.)
- A. SnapCenter Application Plugin
- B. Host OS (OS)
- C. SnapCenter Host Plugin
- D. Browser
Answer: B,C
NEW QUESTION # 45
You want to set up protection relationships at the time of provisioning one or more primary volumes in the source cluster in ONTAP. Which NetApp management tool enables you to accomplish this task?
- A. SnapCenter
- B. OnCommand System Manager
- C. ONTAPCLI
- D. OnCommand Unified Manager
Answer: B
NEW QUESTION # 46
You are asked to re-purpose a NetApp FAS cluster. You need to verify that all encrypted data has been securely erased.
Which two features would allow you to securely re-purpose the array? (Choose two.)
- A. Secure Purge
- B. NetApp Aggregate Encryption
- C. Disk Sanitize
- D. SnapLock Compliance
Answer: A,B
NEW QUESTION # 47
Click the Exhibit button.
You must set up SVM replication for the first time using CLI. This replication will be used for DR purposes.
The SVM configuration does not need to be replicated at this time. In this configuration, you will be reusing a default policy.
Referring to the exhibit, what are two missing steps from the SVM replication workflow? (Choose two.)
- A. Initialize the relationship with the id-preserve optionset to true.
- B. Exclude specific LIFs and protocols from the replication policy.
- C. Initialize the newly created SnapMirror relationship.
- D. Create a relationship with the id-preserve option set to false.
Answer: A,D
NEW QUESTION # 48
Your customer wants to ensure that the SnapMirror relationships are easily managed in a bidirectional, multi-cluster environment. Which version of clustered Data ONTAP would you recommend?
- A. clustered Data ONTAP 8.1.4
- B. clustered Data ONTAP 8.3
- C. clustered Data ONTAP 9.1
- D. clustered Data ONTAP 8.2.3
Answer: C
NEW QUESTION # 49
You have two ONTAP clusters, cluster1 and cluster2. Cluster1 has an SVM serving SMB3 data and you want to protect it by replicating it to cluster2 using SVM DR. The source and destination subnets are identical. You want to retain the CIFS server security of the SVM at the destination site.
In this scenario, which three steps would you take to configure the SVM DR relationship? (Choose three.)
- A. Create the SnapMirror relationship with the id-preserve option set to true.
- B. Configure the network for data access on the destination SVM.
- C. Create a CIFS server on the destination SVM.
- D. Initialize the SnapMirror relationship.
- E. Create the destination SVM with the dp-destination subtype.
Answer: A,B,C
NEW QUESTION # 50
A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.
Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum. In this scenario, how much burst time do they need to purchase?
- A. 30 minutes
- B. 45 minutes
- C. 60 minutes
- D. 15 minutes
Answer: C
NEW QUESTION # 51
You must manually upgrade your company's 8-node cluster from ONTAP 9.5 to ONTAP 9.7. Due to the sensitivity of the data that is being stored on the cluster, it is company policy to perform these upgrades one node at a time.
What are two steps that you must perform to accomplish this task? (Choose two.)
- A. Change disk ownership.
- B. Move Epsilon to maintain cluster quorum.
- C. Terminate active NFS connections.
- D. Terminate active SMB connections.
Answer: B,D
NEW QUESTION # 52
Click the Exhibit button.
cluster2::>snapmirror show -instance
Source Path: svm1:svm1_vol3
Destination Path: svm1_2:svm1_2_vol2
Relationship Type: DP
Relationship Group Type: none
SnapMirror Schedule: 5min
SnapMirror Policy Type: async-mirror
SnapMirror Policy: DPDefault
Tries Limit: -
Throttle (KB/sec): unlimited
Mirror State: Snapmirrored
Relationship Status: Idle
Last Transfer Type: update
Last Transfer Error: -
Last Transfer Size: 72 KB
Last Transfer Network Compression Ratio: 1:1
Last Transfer Duration: 0:0:2
Last Transfer From: svm1:svm1_vol3
Last Transfer End Timestamp: 09/24 13:10:04
Progress Last Updated: -
Relationship Capability: 8.2 and above
Lag Time: 0:0:55
Number of Successful Updates: 1
Number of Failed Updates: 0
Number of Successful Resyncs: 0
Number of Failed Resyncs: 0
Number of Successful Breaks: 0
Number of Failed Breaks: 0
Total Transfer Bytes: 212992
Total Transfer Time in Seconds: 5
You want to view your SnapMirros relationship to make sure it is up to date. You issue the snapmirror show -instance command. Referring to the exhibit, how long has it been since the last SnapMirror update has successfullyoccurred?
- A. 5 seconds
- B. 5 minutes
- C. 55 seconds
- D. 55 minutes
Answer: C
NEW QUESTION # 53
A volume has been filled completely by active data and Snapshot copies.
What must you do to make the volume writable again?
- A. Modify the Snapshot reserve.
- B. Delete files in the active file system.
- C. Delete any SnapMirror relationships.
- D. Delete enough Snapshot copies until space is available.
Answer: D
Explanation:
Explanation
(https://library.netapp.com/ecmdocs/ECMP1217273/html/GUID-866A2386-BE9D-474E-99A9-7A16143DBF74
NEW QUESTION # 54
An administrator wants to use SnapCenter 4.1 to back up and restore both their VMware Horizon environment and Microsoft SQL attached database.
In this scenario, which service account role should be configured to accomplish this task?
- A. operator
- B. backup
- C. sysadmin
- D. administrator
Answer: D
NEW QUESTION # 55
You want to conserve disk space in your SnapVault destinations. You enablestorage efficiency on each of the secondary volumes.
Which two statements are true in this scenario? (Choose two.)
- A. If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.
- B. Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.
- C. SnapVault implicitly uses storage efficiency.
- D. Storage efficiency can beenabled on the secondary volume, but a manual schedule will need to be assigned.
Answer: A,B
NEW QUESTION # 56
A client has a 2 TB volume and has enabled the function to automatically delete Snapshot copies in scenarios where capacity will be exceeded. They have set the trigger for this action to the volume | snap_reserve value.
In this scenario, what would trigger this function?
- A. The volume reaches 98% and the snap_reserve is at capacity.
- B. The volume reaches 95%.
- C. The snap_reserve reaches capacity.
- D. The volume reaches 95% and the space_reserve is at capacity.
Answer: A
NEW QUESTION # 57
Click the Exhibit button.
Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?
- A. Reboot aff-02 to resolve the LIF issue.
- B. Move the LIFs to their home ports.
- C. No additional action is necessary.
- D. Disconnect the HA connection between the nodes.
Answer: B
NEW QUESTION # 58
Click the Exhibit button.
You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand UnifiedManager, there are no files available to restore.
Referring to the exhibit, what caused this problem?
- A. Workflow Automation is not configured to restore files from Snapshot copies.
- B. The engineering volume is unprotected.
- C. No Snapshot copies exist for the engineering volume.
- D. The engineering volume is currently online.
Answer: A
NEW QUESTION # 59
Click the Exhibit button.
An employee's computer and mapped home folder has been encrypted with ransomware. You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?
- A. All files in the volume are restored.
- B. Only files that have changed in the volume are restored.
- C. The original data is decrypted in place.
- D. The restore is performed locally.
Answer: A
NEW QUESTION # 60
......
Verified NS0-527 exam dumps Q&As with Correct 158 Questions and Answers: https://actualtests.crampdf.com/NS0-527-exam-prep-dumps.html