Pass Your Fortinet NSE7_ADA-6.3 Exam with Correct 36 Questions and Answers
Latest [Feb 27, 2024] 2024 Realistic Verified NSE7_ADA-6.3 Dumps
Fortinet NSE7_ADA-6.3 exam is a vendor-specific certification, which means it focuses on Fortinet's products and technologies. NSE7_ADA-6.3 exam is designed to measure a candidate's proficiency in using Fortinet's advanced analytics solutions to protect their organization's networks. Fortinet NSE 7 - Advanced Analytics 6.3 certification is recognized globally and is an excellent way for candidates to demonstrate their expertise in advanced security analytics using Fortinet products.
Fortinet NSE7_ADA-6.3 exam is designed to test the candidate's knowledge and skills in identifying, analyzing, and mitigating network security threats using Fortinet's advanced analytics solutions. NSE7_ADA-6.3 exam covers topics such as machine learning, data modeling, and advanced threat detection techniques. Candidates who pass NSE7_ADA-6.3 exam will have a solid understanding of how to leverage Fortinet's advanced analytics solutions to protect their organization's networks.
NEW QUESTION # 18
Which of the following are two Tactics in the MITRE ATT&CK framework? (Choose two.)
- A. BITS Jobs
- B. Discovery
- C. Phishing
- D. Root kit
- E. Reconnaissance
Answer: B,E
Explanation:
Explanation
Reconnaissance and Discovery are two Tactics in the MITRE ATT&CK framework. Tactics are the high-level objectives of an adversary, such as initial access, persistence, lateral movement, etc. Reconnaissance is the tactic of gathering information about a target before launching an attack. Discovery is the tactic of exploring a compromised system or network to find information or assets of interest. References: Fortinet NSE 7 - Advanced Analytics 6.3 Exam Description, page 21
NEW QUESTION # 19
What happens to UEBA events when a user is off-net?
- A. The agent will upload the events to the Worker if it cannot upload them to a FortiSIEM collector
- B. The agent will upload the events to the Supervisor if it cannot upload them to a FortiSIEM collector
- C. The agent will drop the events if it cannot upload them to a FortiSIEM collector
- D. The agent will cache events locally if it cannot upload them to a FortiSIEM collector
Answer: D
Explanation:
Explanation
When a user is off-net, meaning they are not connected to a network where a FortiSIEM collector is reachable, then UEBA events will be cached locally by the agent if it cannot upload them to a FortiSIEM collector. The agent will store up to 100 MB of events in a local database file and try to upload them when it detects a network change or every five minutes.
NEW QUESTION # 20
Refer to the exhibit.
The exhibit shows the output of an SQL command that an administrator ran to view the natural_id value, after logging into the Postgres database.
What does the natural_id value identify?
- A. The collector
- B. The supervisor
- C. An agent
- D. The worker
Answer: A
Explanation:
Explanation
The natural_id value identifies the collector in the FortiSIEM system. The natural_id is a unique identifier that is assigned to each collector during the registration process with the supervisor. The natural_id is used to associate events and performance data with the collector that collected them.
NEW QUESTION # 21
Refer to the exhibit. Click on the calculator button.
Based on the information provided in the exhibit, calculate the unused events for the next three minutes for a
520 EPS license.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
The unused events for the next three minutes for a 520 EPS license can be calculated by multiplying the licensed EPS by the time interval and subtracting the total number of events received in that interval. In this case, the calculation is:
520 x 180 - 27000 = 73460
NEW QUESTION # 22
Refer to the exhibit.
The service provider deployed FortiSIEM without a collector and added three customers on the supervisor.
What mistake did the administrator make?
- A. Customer A and customer B have overlapping IP addresses.
- B. Collectors must be deployed on all customer premises before they are added to organizations on the supervisor.
- C. At least one collector must be deployed to collect logs from service provider infrastructure devices.
- D. The number of workers on the FortiSIEM cluster must match the number of customers added.
Answer: A
Explanation:
Explanation
The mistake that the administrator made is that customer A and customer B have overlapping IP addresses.
This will cause confusion and errors in event collection and correlation, as well as CMDB discovery and classification. To avoid this problem, each customer should have a unique IP address range or use NAT to translate their IP addresses.
NEW QUESTION # 23
Why can collectors not be defined before the worker upload address is set on the supervisor?
- A. To ensure that the service provider has deployed at least one worker along with a supervisor
- B. Collectors receive the worker upload address during the registration process
- C. Collectors can only upload data to a worker, and the supervisor is not a worker
- D. To ensure that the service provider has deployed a NFS server
Answer: B
Explanation:
Explanation
Collectors cannot be defined before the worker upload address is set on the supervisor because collectors receive the worker upload address during the registration process. The worker upload address is a list of IP addresses of worker nodes that can receive event data from collectors. The supervisor provides this list to collectors when they register with it, so that collectors can upload event data to any node in the list.
NEW QUESTION # 24
Which three processes are collector processes? (Choose three.)
- A. phReportM aster
- B. phParser
- C. phAgentManaqer
- D. phRuleMaster
- E. phMonitorAgent
Answer: B,D,E
Explanation:
Explanation
The collector processes are responsible for receiving, parsing, normalizing, correlating, and monitoring events from various sources. The collector processes are phParser, phRuleMaster, and phMonitorAgent.
NEW QUESTION # 25
From where does the rule engine load the baseline data values?
- A. The daily database
- B. The profile report
- C. The memory
- D. The profile database
Answer: D
Explanation:
Explanation
The rule engine loads the baseline data values from the profile database. The profile database contains historical data that is used for baselining calculations, such as minimum, maximum, average, standard deviation, and percentile values for various metrics.
NEW QUESTION # 26
Refer to the exhibit.
Why was this incident auto cleared?
- A. The original rule did not trigger within five minutes
- B. Within five minutes the packet loss percentage dropped to a level where the reporting IP is the same as the host IP
- C. Within five minutes, the packet loss percentage dropped to a level where the reporting IP is same as the source IP
- D. Within five minutes, the packet loss percentage dropped to a level where the host IP of the original rule matches the host IP of the clear condition pattern
Answer: D
Explanation:
Explanation
The incident was auto cleared because within five minutes, the packet loss percentage dropped to a level where the host IP of the original rule matches the host IP of the clear condition pattern. The clear condition pattern specifies that if there is an event with a packet loss percentage less than or equal to 10% and a host IP that matches any host IP in this incident, then clear this incident.
NEW QUESTION # 27
How can you invoke an integration policy on FortiSIEM rules?
- A. Through Incident Notification settings
- B. Through Notification Policy settings
- C. Through remediation scripts
- D. Through External Authentication settings
Answer: B
Explanation:
Explanation
You can invoke an integration policy on FortiSIEM rules by configuring the Notification Policy settings. You can select an integration policy from the drop-down list and specify the conditions for triggering it. For example, you can invoke an integration policy when an incident is created, updated, or closed.
References: Fortinet NSE 7 - Advanced Analytics 6.3 Exam Description, page 9
NEW QUESTION # 28
Identify the processes associated with Machine Learning/Al on FortiSIEM. (Choose two.)
- A. phReportMaster
- B. phRuleWorker
- C. phAnomaly
- D. phFortiInsightAI
- E. phRuleMaster
Answer: C,D
Explanation:
Explanation
The processes associated with Machine Learning/AI on FortiSIEM are phFortiInsightAI and phAnomaly.
phFortiInsightAI is responsible for detecting anomalous user behavior using UEBA (User and Entity Behavior Analytics) techniques. phAnomaly is responsible for detecting anomalous network behavior using NTA (Network Traffic Analysis) techniques.
NEW QUESTION # 29
Refer to the exhibit.
If the Z-score for this rule is greater than or equal to three, what does this mean?
- A. The rate of firewall connection is optimum.
- B. The rate of firewall connection is above the current average value.
- C. The rate of firewall connection is below historical average value.
- D. The rate of firewall connection is above the historical average value.
Answer: D
Explanation:
Explanation
If the Z-score for this rule is greater than or equal to three, it means that the rate of firewall connection is above the historical average value. The Z-score is a measure of how many standard deviations a value is away from the mean of a distribution. A Z-score of three or more indicates that the value is significantly higher than the mean, which implies an anomaly or deviation from normal behavior.
NEW QUESTION # 30
Refer to the exhibit.
Is the Windows agent delivering event logs correctly?
- A. The agent is registered and it is sending logs correctly.
- B. The logs are buffered by the agent and will be sent once the status changes to managed.
- C. The agent is not sending logs because it did not receive a monitoring template.
- D. Because the agent is unmanaged. the logs are dropped silently by the supervisor.
Answer: D
Explanation:
Explanation
The windows agent is not delivering event logs correctly because the agent is unmanaged, meaning it is not assigned to any organization or customer. The supervisor will drop the logs silently from unmanaged agents, as they are not associated with any valid license or CMDB.
NEW QUESTION # 31
On which disk are the SQLite databases that are used for the baselining stored?
- A. Disk1
- B. Disk2
- C. Disk4
- D. Disk3
Answer: D
Explanation:
Explanation
The SQLite databases that are used for the baselining are stored on Disk3 of the FortiSIEM server. Disk3 is also used for storing raw event data and CMDB data.
NEW QUESTION # 32
......
The Fortinet NSE 7 - Advanced Analytics 6.3 certification exam is intended for security professionals who have experience with Fortinet security products and want to deepen their knowledge in the area of advanced analytics. Candidates who pass the exam will have proven their ability to apply advanced analytics techniques to security data and will be able to use this knowledge to improve security posture and reduce risk for their organization. NSE7_ADA-6.3 exam is designed to be challenging and requires a significant amount of preparation, but the benefits of earning this certification are well worth the effort.
Get 2024 Updated Free Fortinet NSE7_ADA-6.3 Exam Questions and Answer: https://actualtests.crampdf.com/NSE7_ADA-6.3-exam-prep-dumps.html