Latest [Aug 20, 2023] CompTIA 220-1001 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning CompTIA 220-1001
CompTIA A+ certification is a valuable credential for individuals seeking entry-level positions in IT support. It is recognized by employers worldwide and is often a requirement for many IT support roles. By passing the 220-1001 exam, individuals can demonstrate their knowledge and competency in the foundational skills required for a career in IT support.
NEW QUESTION # 300
A technician was asked to virtualize four existing PCs before decommissioning them. The resulting VMs are imported into a new VM workstation running a hypervisor on top of an OS Three of the VMs are running property, but the entire system locks up when trying to start the fourth VM. Which of the following should the technician have reviewed prior to creating the VMs to prevent this from occurring? (Select TWO)
- A. Network requirements
- B. Security requirements
- C. Hypervisor requirements
- D. Backup requirements
- E. Resource requirements
- F. Storage requirements
Answer: B,C
NEW QUESTION # 301
Some users are unable to access the Internet form their workstations. A technician runs the ipconfig command on one of the workstations and sees the following:
The technician pings 8.8.8.8 and gets no response. Next, the technician pings 192.168.1.1 and gets no response. The technician is able to successfully ping an adjacent workstation but cannot ping the print server on the floor below. Which of the following is the MOST likely cause of the Internet connectivity issue in the office?
- A. There is a problem with a router in the office
- B. The users are not getting correct IP addresses from the DHCP server
- C. The wireless access point in the area is down
- D. There is a problem with a DNS server in the office
Answer: A
NEW QUESTION # 302
Ann, a user, reports her wireless headset is no longer working property with her mobile device after a recent security update. Which of the following should a technician configure FIRST to resolve the issue?
- A. Bluetooth settings
- B. NFC settings
- C. WiFi settings
- D. Security settings
Answer: C
NEW QUESTION # 303
Drag each mobile technology to the description of its use. Some answers will not be used.
Answer:
Explanation:
NEW QUESTION # 304
A technician is setting up a printer for a small office that does not have an RJ-45 jack. The users'
computers are all in the same workgroup and are connected physically to the same network switch. The
technician needs to make sure all users can print to the new printer through the switch. Which of the
following should the technician configure?
- A. Shared printer
- B. Bluetooth printing
- C. Print server
- D. Cloud printing
Answer: A
NEW QUESTION # 305
Which of the following connects a PC to its default gateway?
- A. NIC
- B. Switch
- C. Cable modem
- D. Router
Answer: B
NEW QUESTION # 306
A technician is installing an optical drive in an engineering workstation that allows for optical media backups up to 128GB for each project. Which of the following doves should the technician install in the workstation?
- A. BD-R
- B. DVR-RW DL
- C. LTO-2
- D. CD-RW
Answer: A
NEW QUESTION # 307
Which of the following wireless networking protocols will broadcast at SGHz frequencies?
- A. 802.11b
- B. 802.11g
- C. 802.11q
- D. 802.11x
- E. 802.11ac
Answer: E
NEW QUESTION # 308
A customer contacts the help disk stating a laptop does not remain charged for more than 30 minutes and will not charge more than 15%. Which of the following components are the MOST likely causes the issue? (Select three.)
- A. LCD power inverter
- B. Wireless antenna
- C. Battery
- D. AC adapter
- E. Processor
- F. Motherboard
- G. VGA card
- H. Backlit keyboard
Answer: A,C
NEW QUESTION # 309
A technician sets up a new printer on the network, allowing it to obtain an IP address. The technician records the IP address and sets up users to print using the information. The following Monday after powering on the printer, users report they can no longer print. After verifying users can access other network shares, the technician prints a configuration page and sees the IP address has changed.
Which of the following is the BEST method for the technician to ensure this will not happen again?
- A. Set up the users to print using the newly assigned IP address.
- B. Statically assign the current IP address to the printer.
- C. Create an IP reservation for the printer on the DHCP server.
- D. Set up MAC filtering on the switch to ensure the printer gets the same IP.
Answer: C
NEW QUESTION # 310
A network administrator would like to increase network bandwidth to iGbps between two office buildings that are 0.5mi (805m) apart. Which of the following would be the BEST solution?
- A. Cat 6
- B. Coaxial
- C. Plenum
- D. Fiber
Answer: D
NEW QUESTION # 311
The network administrator has changed the IP address of ComputerA from 192.168.1.20 to 10.10.10.20 and now jane, a user, is unable to connect to file shares on ComputerA from ComputerB using the computer name.
INSTRUCTIONS
Using the available tools, resolve the connectivity issues.
After troubleshooting the issue, verify a successful connection.
If at any time you would like to bring back the initial state of the simulation? please click the Reset All button.
Answer:
Explanation:
See the explanation below:
Explanation
We need to flush the DNS to have the new IP address assigned to the same computer name. Use the ipconfig/flushdns command.
NEW QUESTION # 312
A small ISP has hired a new technician Joe, the new technician, is being trained to configure customers* home networks The trailing instructor gives me technician a starter kit with cables, cable ends, and other network equipment and asks mm to build a working network.
The computer should be connected to have internet connectivity and the phone should be connected to have a dial tone.
INSTRUCTIONS
Use the appropriate cables. cable ends, tools and equipment to configure the network ana connect an components accordingly There are 3 steps and the simulation starts on step 1.
Answer:
Explanation:
See the answer below in explanation part.
Explanation
Answer of both steps below.
A picture containing text, screenshot, indoor Description automatically generated
Diagram Description automatically generated with medium confidence
NEW QUESTION # 313
A customer recently moved a high-end graphics card from a known-working computer to a different computer.
The computer works without issue when viewing email and web pages or when using certain applications.
However, when a game with high-end graphics requirements is opened, the program will run for a few minutes before the computer shuts down. Which of the following is MOST likely causing the problem?
- A. Video RAM
- B. CPU frequency
- C. Monitor resolution
- D. Power supply wattage
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 314
An end user has signed up to use a web-based calendar application.
Which of the following solutions has the user purchased?
- A. DaaS
- B. SaaS
- C. laaS
- D. PaaS
Answer: B
NEW QUESTION # 315
A user experiences a paper jam when printing a 500-page, double-sided report. A technician .... then powers the printers off and back on. The printer's LCD display says it is ready, and all cables are securely connected, The user attempts to print the report again. but the printer still does not print....... troubleshooting steps should the technician attempt FIRST?
- A. Remove the printer memory and reseat it in the socket.
- B. Disassemble the printer body and look for further paper jams.
- C. Restart the print spooler service and inspect the queue.
- D. Replace the drum and loner for the printer.
- E. Try reinstalling the print driver tor the printer
Answer: C
NEW QUESTION # 316
Which of the following describes the network type that is created when connecting a Bluetooth headset to a cell phone?
- A. WAN
- B. LAN
- C. PAN
- D. MAN
Answer: C
NEW QUESTION # 317
Which of the following encryption types is used with WPA2?
- A. SSH
- B. AES
- C. TKIP
- D. SSL
Answer: B
NEW QUESTION # 318
A customer contacts the help disk stating a laptop does not remain charged for more than 30 minutes and will not charge more than 15%. Which of the following components are the MOST likely causes the issue? (Select three.)
- A. LCD power inverter
- B. Wireless antenna
- C. Battery
- D. AC adapter
- E. Processor
- F. Motherboard
- G. VGA card
- H. Backlit keyboard
Answer: A,C,D
NEW QUESTION # 319
A user reports that a small part of a laptop's screen displays black instead of the appropriate color. A technician changes the display settings on the user's laptop and then runs onboard diagnostics; however, the issue is still not resolved. Which of the following should the technician perform NEXT?
- A. Test for dead pixels.
- B. Replace the digitizer.
- C. Update the video driver.
- D. Check for recent updates.
Answer: A
NEW QUESTION # 320
After upgrading a smartphone's OS, Joe, a user, reports the smartphone no longer connects to his automobile automatically when near it. Joe restarts the smartphone, but the problem persists.
Which of the following should a technician do NEXT to restore the previous functionality?
- A. Connect the smartphone to the automobile via USB.
- B. Enable airplane mode and then disable airplane mode.
- C. Reenable the smartphone's Bluetooth radio.
- D. Perform a rollback of the smartphone's OS.
Answer: C
NEW QUESTION # 321
A user reports the laser printer has stopped printing. When performing a test print, the page comes out mostly blank with ghosting images. A technician verifies a new toner cartridge was installed several weeks ago. There are no errors in the system's log. Which of the following is the MOST likely reason for the printer issue?
- A. There is a stuck print job in the print queue.
- B. There is no connectivity between the printer and the computer.
- C. Printer drivers are not installed on the computer.
- D. The fuser has failed and requires replacement.
Answer: D
NEW QUESTION # 322
Which of the following wireless network protocols only supports 5GHz?
- A. 802.11b
- B. 802 11g
- C. 80211a
- D. 802.11n
Answer: C
NEW QUESTION # 323
A user is looking for software that can overlay information on objects seen through the camera.....................
- A. geotagging
- B. object character recognition
- C. artificial intelligence
- D. virtual reality.
- E. augmented reality
Answer: D
NEW QUESTION # 324
The feature that allows users to store files in cloud-based when necessary, but can removed when space is freed up, is known as:
- A. on-demand
- B. synchronization application
- C. resource pool
- D. shared resources
Answer: A
NEW QUESTION # 325
......
Authentic Best resources for 220-1001 Online Practice Exam: https://actualtests.crampdf.com/220-1001-exam-prep-dumps.html