BICSI OSP-002 Exam Dumps [2024] Practice Valid Exam Dumps Question
OSP-002 Dumps - Grab Out For [NEW-2024] BICSI Exam
NEW QUESTION # 52
(Choose all correct answers)
What optical fiber types are recognized in the structured cabling standards?
- A. Multimode in backbones
- B. Multimode in horizontal connections
- C. Singlemode in backbones
- D. Singlemode in horizontal connections
Answer: A,B,C
NEW QUESTION # 53
What wavelengths are appropriate for use with singlemode fiber?
- A. 1310 & 1550 nm
- B. 850 & 1490 nm
- C. 850 & 1300 nm
- D. 650 & 850 nm
Answer: D
NEW QUESTION # 54
Rays of light transmitted in multimode fiber are called \_\_\_\_\_\_\_\_\_\_.
- A. Modes
- B. Refractions
- C. Reflections
- D. Waves
Answer: A
NEW QUESTION # 55
What copper cable types are included in the TIA-568 structured cabling standards?
- A. UTP (unshielded twisted pair), STP (shielded twisted pair) and coax
- B. Any communications cable
- C. UTP (unshielded twisted pair) and coax
- D. UTP (unshielded twisted pair), ScTP (screened twisted pair) and STP (shielded twisted pair)
Answer: D
NEW QUESTION # 56
What cable types are included in the TIA-568 structured cabling standards?
- A. UTP (unshielded twisted pair), STP (shielded twisted pair) and coax
- B. UTP (unshielded twisted pair), ScTP (screened twisted pair), STP (shielded twisted pair) and fiber optics
- C. UTP (unshielded twisted pair), ScTP (screened twisted pair) and STP (shielded twisted pair)
- D. UTP (unshielded twisted pair) and coax
Answer: B
NEW QUESTION # 57
Potential sources of interference for wireless LANs include \_\_\_\_\_\_\_.
- A. Remote controls like door openers
- B. Moving objects
- C. Other wireless networks
- D. All of the above
Answer: D
NEW QUESTION # 58
Rolling objects create what type of load on an access flooring system?
- A. Physical
- B. Virtual
- C. Dynamic
- D. Static
- E. Impact
Answer: E
NEW QUESTION # 59
Smaller buildings with a serving area larger than 1000 ft2 and less than 5000 ft2 may be served by:
- A. wall cabinets.
- B. shallow rooms.
- C. self-contained cabinets.
- D. enclosed cabinets.
Answer: B
NEW QUESTION # 60
To maintain rated performance, twists in each pair must be maintained to within \_\_\_\_\_\_\_ of the termination.
- A. 3 in or 75 mm
- B. 2 in or 50 mm
- C. 1 inch or 25 mm
- D. 1/2 inch or 13 mm
Answer: D
NEW QUESTION # 61
Gigabit Ethernet uses all four pairs of a UTP cable \_\_\_\_\_\_\_\_\_.
- A. With 2 pairs in each direction
- B. For power
- C. Bidirectionally
- D. Simultaneously and bidirectionally
Answer: D
NEW QUESTION # 62
Structured cabling standards call for a maximum length of singlemode fiber optic cable for backbones of
\_\_\_\_\_\_\_\_\_\_.
- A. 2000 meters
- B. 1000 meters
- C. 3000 meters
- D. 800 meters
Answer: A
NEW QUESTION # 63
Wireless access points can use \_\_\_\_\_ to simplify powering the equipment.
- A. Power over Ethernet (IEEE 802.3ah)
- B. AC
- C. Low voltage power supplies
- D. Data signal power
Answer: A
NEW QUESTION # 64
Ethernet changed from a \_\_\_\_\_ to \_\_\_\_\_\_\_\_ network architecture when it switched to UTP cable.
- A. Ring, coax
- B. Bus, star
- C. Ring, UTP
- D. Bus, ring
Answer: B
NEW QUESTION # 65
What is a RJ-45 connector?
- A. A modular 8 pin connector with USOC pinout
- B. A special high frequency connector
- C. A trade name
- D. The connector used only with Cat 5e/6 jacks
Answer: A
NEW QUESTION # 66
The principle of operation of OTDRs is similar to \_\_\_\_\_\_\_.
- A. Radar
- B. Lenses
- C. Mirrors
- D. Power meters and sources
Answer: A
NEW QUESTION # 67
Which network connection type has the highest bandwidth?
- A. Optical fiber
- B. Wireless
- C. Power line
- D. UTP
Answer: A
NEW QUESTION # 68
What is the installed cable plant from work area outlet jack to the patch panel in the telecom closet called?
- A. Link cable
- B. Patchcord
- C. Permanent link
- D. Channel
Answer: C
NEW QUESTION # 69
An ICT distribution designer is coordinating with local agencies for an upcoming campus improvement project which could affect the design. Which two of the following listed items will MINIMIZE design changes once the project begins? (Choose two.)
- A. Approval of budget by chief financial officer (CFO)
- B. Hand off of documentation to project manager
- C. Identification of maintenance holes, hand holes locations
- D. Identification and agreement of conduit pathway routes
- E. Approval of permit by AHJ - local Fire Marshal
Answer: C,D
NEW QUESTION # 70
___________ should be used to bundle cables since _________.
- A. Hook and loop cable ties, tight cable ties can affect cable performance
- B. Rubber bands, they stretch
- C. Cable ties tightened with guns, cables should not be allowed to move around
- D. Cable ties, loose cables are a safety hazard
Answer: A
NEW QUESTION # 71
Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Which types of dispersion needs to be tested in long singlemode fiber links?
- A. Polarization mode
- B. Chromatic
- C. Modal
- D. Differential Modal
Answer: B
NEW QUESTION # 72
......
OSP-002 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://actualtests.crampdf.com/OSP-002-exam-prep-dumps.html